Futaba 1st 2nd 3rd Plastic Gear S9251/S9256 This is the Gear Set for the Futaba S9251 and S9256 Servos These gears transfer movement from the motor to the servo horn. FEATURES: Replaces worn or damaged gears INCLUDES: Five nylon 1st gears Five nylon 2nd gears Five nylon 3rd gears REQUIRES: Installing in servo case
This is the Futaba 6EXH 6-channel Helicopter Radio with the R146IP Mini PCM Receiver and four S3103 Micro Mini Servos. This radio is diode protected to prevent overcharging, which means that the battery cannot be discharged through the transmitter. FEATURES: Six model memory, four character model naming Multiple swash plate...
*****Compatible with the Futaba GY601 and GY611 gyros only.***** This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps. FEATURES: Equipped with a Brushless motor that lasts longer and operates at a lower temperature than Brushed...
This is the Futaba BLS451 Brushless Digital High Torque, High Speed Servo. Designed for any RC hobby application. This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps. FEATURES: Equipped with a Brushless motor that lasts longer...
Futaba FGS-9257 Gear Set S9257 Servo This is the replacement Gear Set for the Futaba S9257 EP Heli Servo - FUTM0667. INCLUDES: One of each: white nylon 1st, 2nd & 3rd gears One white nylon final gear (this is the one with the splined shaft REQUIRES: Installation
"This is the GY401 Gyro with SMM Technology from Futaba. This is a High Performance, Compact and Lightweight (AVCS) Angular Vector Control System gyro developed for model helicopters. Because the sensor and control circuit are integrated, it is simple to install. FEATURES: AVCS System: Since the rudder trim changes (caused by...
EATURES: Ultra small and light weight gyro contained in one unit-no separate sensor and control unit Utilizes a high speed advanced PID (Proportional-Integral- Derivative) control algorithm Latest MEMS (Micro-Electro-Mechanical Systems) allows complete control system on one chip Delivers superior performance with analog servos...
FEATURES: Digital technology gives performance advantage One Ball Bearing and one Metal Bushing Nylon gears One year warranty. INCLUDES: One S3151 Digital servo with preinstalled servo horn Four Rectangular Grommets Four Mounting Screws One Large Round Horn One Six Arm Horn One Four Arm Horn. SPECS: Speed: .21 sec/60° @ 4.8V...
This is the Bulk Version Futaba S3151 Digital Servo. This version includes one round servo horn with no mounting hardware or packaging. FEATURES: Digital technology gives performance advantage Great for a wide variety of R/C models One ball bearing and one metal bushing Plastic gears INCLUDES: One S3151 Digital servo...
FEATURES: For small electric powered aircraft models. INCLUDES: Futaba S3156 servo, 0.79" (20mm) long 4-point horn, 1.6" (40mm) long 4-point horn, 0.79" (20mm) diameter round horn, four 2x11mm mounting sccrews One year limited warranty. REQUIRES: Installing in model, connecting linkage and connecting to receiver Order DUBM6924...
FEATURES: Coreless motor for reduced weight and high-speed response Digitally enhanced microprocessors cut in half the response time from transmitter input to servo reaction Dual ball bearing gear train Dust and water resistant-not water proof Black plastic case One year warranty INCLUDES: One S9254 Digital Coreless High...
The ultimate tail servo for use on a Trex450. This is a High Torque, High Speed Digital Mini Servo from Futaba. DO NOT USE WITH AM SYSTEMS! FEATURES: Coreless motor: conventional servo motors have a steel core armature wrapped with wire that spins inside magnets. In a coreless design the armature uses a wire mesh that forms a...
Futaba Servo Case Set S9256 This is the Case Set for the Futaba S9256 digital servo, FUTM0226. FEATURES: Alumite case with center heat sink to cool motor INCLUDES: One each top, center and bottom section for the Futaba S9256 servo REQUIRES: Installing all components into case SPECS: Length: 1.6" (40mm) not including mounting...
This is the Gear Set for the Futaba S9451 Digital Servo. These gears transfer movement from the motor to the servo horn. FEATURES: Replaces worn or damaged gears. INCLUDES: One nylon 1st gear One steel and brass 2nd gear One steel and brass 3rd gear One steel 4th or final output gear REQUIRES: Installing in servo case.
"Futaba GY401 Gyro w/S9254 Digital Servo This is a high performance, compact and lightweight (AVCS) Angular Vector Control System gyro developed for model helicopters. Because the sensor and control circuit are integrated, it is simple to install. FEATURES: AVCS System: Since the rudder trim changes (caused by wind and other...
This is the Futaba S3154 Digital High Torque, High Speed Micro Servo. Ideal for electric planes and small electric helis! Specifications Torque: 21 oz/in @ 4.8V and 23.6 oz/in @ 6V Speed: .10 sec/60deg @ 4.8V and .09 sec/60deg @ 6V Dimensions: .86 X .43 X .78in ( 21.8x11x19.8mm) Weight: .279oz ( 7.9g )